> 뉴스 > 업계 뉴스 > China will build a return space shuttle! Scheduled to complete in 2030
문의하기
문의 : Fujian Nanan Boreway Machinery Co.,Ltd., 추가 : Huahui Center, Shuitou Town, Quanzhou, Fujian, China, ...
지금 연락하십시오
우리를 따르십시오
최근 뉴스
  • 다이아몬드의 물리적 특성

    다이아몬드는 가장 큰 광물 경도 중 하나입니다. 다이아몬드는 자연과 인공의 원인에 따라 두 가지 범주로 나눌 수 있습니다. 자연 ...
  • 다이아몬드 세그먼트의 생산 기술?

    BOREWAY 기계식 다이아몬드 세그먼트의 제조 공정은 배치, 혼합, 냉간 압착, 고온 압착의 5 단계로 나뉩니다.
  • Lavina 퀵 체인지 다이아몬드 콘크리트 그라인딩 슈즈 란?

    설명 : Lavina 퀵 체인지 다이아몬드 콘크리트 그라인딩 슈즈 란? 우리의 라비나 다이아몬드 그라인딩 슈즈 주로 콘크리트 연삭에 사용되며 석재 표면 연삭에도 ...
  • 초박형 톱날베이스의 두께는 얼마입니까?

    초박형 다이아몬드 톱날은 고정밀 특수 목적의 다이아몬드 절삭 날을 말하며, 다양한 본딩 제에 따라 금속 본딩 제, 수지 본딩 제 및 전기 도금 다이아몬드 커팅 블레이드로 생산됩니다.
  • 납땜의 프로필

    납땜은 납땜 금속 재료의 모재의 용융점보다 낮은융점 땜납 용접보다 높은 온도로 가열 될 것이다및 필러 금속의 사용 모재의 용융 온도보다 낮은액체 땜납 젖음...
  • 수지의 정의

    수지는 연화, 통상 연화 또는 용융 한 후 가열의 범위를 말한다외력의 작용 하에서 유동하는 경향, 온도가고체, 반고체이고, 때로는 액체 유기 중합체 일 수있다...
  • 왜 다이아몬드 블레이드 가공 강철을 할 수 없습니까?

    섭씨 800도 이상에서는 다이아몬드 분말이 철에 용해됩니다. 마찰 열, 직경의 결과로 철 재료를 선회하는 다이아몬드 절삭 공구의 사용 ...
  • 125mm 덤불 해머 플레이트가 콘크리트에 사용될 수 있습니까?

    덤불 해머 플레이트는 오래된 에폭시 코팅을 제거하고 다른 종류의지면을 개조하고 골동품 효과를 만듭니다. 효과적이고 안전한 안티 슬립 화강암, 화강암, 대리석 및 콘크리트 표면. 새 레이어를 놓기 전에 콘크리트의 연삭 및 연마를위한 준비.
  • 톱날은 옥을자를 수 있습니까?

    그것은 유리, 세라믹 및 흑연과 같은 보석, 석재 및 단단하고 취성된 재료를 절단하는 데 널리 사용됩니다.
  • 다이아몬드 그라인딩 컵 휠에 적합한 그릿을 선택하는 방법?

    설명 : 에 대한 올바른 입자를 선택하는 방법 다이아몬드 그라인딩 컵 휠? 다이아몬드 그라인딩 컵 휠 금속 결합 다이아몬드는 강도가 높고 내마모성이 ...

소식

China will build a return space shuttle! Scheduled to complete in 2030

Chois Dong Www.boreway.com 2017-06-12 18:56:50
In the Space shuttle, space science and technology is focused on research and development level take-off and landing, reusable new generation of Earth-and-flight aircraft, has completed the engine and other key technical ground tests.

The next China Aerospace Engineering group has proposed a "cloud-free" project, which will be completed in 2030 to test the "Sky aircraft" technology. Liu Shiquan, deputy general manager of China Aerospace Engineering group, unveiled the plan for the first time at the second business Space summit in Wuhan. He said that the "sky plane" also known as the Space Shuttle aircraft, is capable of carrying out space launch missions, and repeated the use of a new generation of world-round aircraft.

As envisaged, the space plane can take off from the ground airport level, accelerate the ascent in the atmosphere; one or two-level separation at 30 to 40 km altitude, level-level landing return; the second level continues to climb into the near Earth orbit, complete the transport task after re-entry into the atmosphere, with Low-cost, safe, convenient, mobile and other advantages.
"Teng Yun Project" covers a number of key technologies including structural and thermal protection, aerodynamic profile design, combined powertrain systems, said Daijiangyong, Assistant Minister for Science and Technology development at the Chinese Aerospace Division, in an interview with the media. Among them, the combined power system will be realized: when the aircraft take-off, the use of low-speed performance of the highest aero-turbine engine, to a certain speed, to adapt to the atmosphere in the high-speed flight of the stamping engine, to reach the adjacent space, and then use the rocket engine into space. Daijiangyong said it planned to complete key technology research in 2025 and completed the test flight of the two-stage air-orbit aircraft technology in 2030.