How to use an angle grinder?
While the hand held angle grinder will use diamond cutting blade when cutting, the cutting blade is the most commonly used tool in the grinding process. When used, the angle grinder can drive it to rotate at a high speed. It can grind, slot and cut workpieces of different materials.
Cutting wall groove in decoration Hand held angle grinder is usually used for convenience Install the slotted cutting blade and connect the electricity The angle grinder sold by boreway factory can be sawed quickly with a little effort. If the saw is deviated or there are burrs, rub it with the saw blade.
What should we pay attention to when we are using angle grinder to slot cutting pieces?
-Before use, make sure they are in good condition and the electric tools are equipped with protective covers;
-The staff must wear protective covers and work clothes;
-The cutting blade shall be installed on the electric tool correctly, and the rotating speed of the electric tool shall not be higher than the maximum speed of the slotted cutting blade;
-The cutting blade cannot be used as a grinding disc;
-Do not use too much force when cutting and grinding;
-Before installing a new cutting blade, be sure to turn off the power supply of the electric tool and pull out the socket plug;
-Before cutting and grinding, let the cutting blade work idle for a while;
-Do not use the cutting piece without reinforcing mesh on electric tools;
-It is forbidden to use damaged equipment;
-It is forbidden to block the cutting blade in the cutting seam;
-When cutting or grinding is stopped, the rotating speed should be stopped naturally. It is strictly forbidden to apply pressure to the slotted cutting blade manually.
In the common cutting tools, Tuck Point Blades and grinding disc is the most used, their use function and shape are very similar.
The slotted cutting piece can be used to cut the wall with high cutting efficiency and precision. Diamond cutting blade is composed of matrix and diamond cutter head. It is mainly used for cutting non-metallic materials, such as stone, ceramics, concrete, etc.
