What are the Possible Problems in Using Diamond Saw Blade?

What are the possible problems of using Granite Cutting Saw Blades?

1.How to grind the diamond saw blade?
The quality of grinding diamond saw blade directly affects the service life of diamond saw blade, and good grinding should be carried out on full-automatic equipment. The grinding wheel piece should not be fed too fast, and the grinding time should not be less than 30 minutes each time.

2.Is the diamond saw blade swept during the sawing return?
Causes: The main shaft of the equipment motor has large jitter, or the pendulum difference of the diamond saw blade matrix is large.

3.Why is there Burr phenomenon?
The alloy of diamond saw blade is not sharp, and Burr phenomenon will occur when it can't continue cutting. When burrs occur, the diamond saw blade needs to be grinded.

4.What are the hazards of inferior diamond saw blades?
Short cutting time, frequent replacement and a waste of time. The precision is not up to standard, wasting materials. It does great damage to the main shaft and motor of the equipment and shortens the service life of the equipment. Poor security and easy to hurt people.

5.Why does the cutting section have scratches?
There are many causes of scratches: impurities in materials, defects of Diamond Cutting Blades for Granite, deviation of equipment motor and spindle, etc.

6.Why does the phenomenon of tooth dropping (alloy dropping) occur?
Alloy shedding is caused by inferior welding pieces or welding equipment. The high-quality welding piece should be silver-copper-silver three layers, and the inferior diamond saw piece only has silver-copper two layers.