Boreway Speedy Side Exhaust Center Water Feed Granite Air Polisher M14 M16 5/8-11 Thread
- Weight:1.6KG.
- Type: Angle Grinder.
- Air Inlet:1/4” Npt.
- Disc Diameter: 100mm.
- Free Speed: 0-4500 RPM.
- Power Source: Pneumatic.
- Avg. Air Consumption: 16cfm .
- Air Pressure:90Psi(621KPa).
- Disc(Wheel) Type: Polishing Pad.
- Maximum Diameter: 5 Inch 125mm.
- Shaft Thread:M14,M16,5/8”-11.
Product Description: |
Speedy Side Exhaust Center Water Feed Granite Air Polisher
This Pneumatic Angle Grinder Excellent performance with lower vibration and noise,Gravity casting housing carries long duration,Centre water feed function smooth finishing and reduces dust and improves environment protection. Water valve can be adjusted for variable water-flow. Include a reversible side handle for easy operation.Light weight(3lbs) and compactable design are suitable for single-hand operation. Rubber sleeve to hold the polisher well. 4" connection pad with verlcro hook to connect the polishing pads.
Side exhaust air polisher/ Pneumatic wet polisher Compressed air should be dry and cool, as high-moisture air will lead to internal rusting that could
cause machine failure. The air pressure should normally be maintained at 90PSI~116PSI(0.62MPa~0.8MPa). Always supply adequate water during
operation.
Advantage:
1. Rear exhaust.
2. Side mounted water control knob and air inlet with regulating knob.
3. This low speed tool does the sanding and polishing work by fitting sanding disc wet 3"-4" in different grit from coarse to fine. Great for laminating marble or stone table and trim work.
4. The water-fed installation favors your marble and stone finish work by water flow on the working area and does no harm to your body due to non-dust atmosphere at operation.
Specifications: |
Speedy Side Exhaust Center Water Feed Granite Air Polisher
![Side Exhaust Center Water Feed Granite Air Polisher](/uploads/upfile/601/images/c5/20220326205739727.jpg)
Pictures: |
Speedy Side Exhaust Center Water Feed Granite Air Polisher