Can ceramic tiles be used to cut marble?

Both marble processing and cutting processing require professional marble saw blades. Cutting processing is mainly to cut marble blocks into semi-finished products of the required thickness, such as wool boards or strips, blocks and other shapes. This process is a rough processing process, cutting The process is to shape and cut the wool board or polishing board according to the length and width dimensions required by the order to obtain the required specification board.

Marble cutting saw blade is a common stone saw blade. Among many stones, marble is widely used, especially natural marble, which is more and more popular. It is often used in indoor decoration and other scenes. The marble saw blade is not only sharp, but also has a long service life. When cutting, it is not easy to adhere waste scraps, and it is easy to clean up. The grinding workpiece made by this has high precision, fast speed, and low surface wear rate.

The marble saw blade adopts industry-leading carcass powder, exclusive formula with high cost performance, good sharpness, and correspondingly extended life.


1. Check the diamond saw blade for damage and serious deformation before using the ceramic tile cutting blade. If it is damaged, it is strictly forbidden to use it. Check whether there is any dirty thing on the chuck of the cutting machine. If there is something to be cleaned and then installed, whether the main shaft bearing or the sleeve is badly worn. If the wear is serious, replace the new sleeve.

2. When installing the ceramic tile cutting piece, the installation direction should be consistent with the indicated direction, and the inconsistent direction is easy to cause the phenomenon of inability to cut.

3. If it is a dry cutting saw blade during use, the ceramic tile cutting blade should be idle for a few seconds every 10 to 15 seconds, so that the saw blade can have time to cool, the cutting effect will be better.