What should be paid attention to when the Diamond Saw Blade Cuts Stones?
When the diamond saw blade is cutting, if the safety of cutting is not paid attention to, it is likely to cause danger. The following are some safety tips of diamond Cicular saw blade cutting compiled by the editor, hoping to help you:
1.The stones shall not be less than 0.5m3, and shall be placed stably. The bottom surface shall be padded with square wood and firmly plugged. The stones shall be located on the symmetrical position of the working platform to ensure the stability of the working platform and stones, without shaking and shaking.
2.The trial cutting can only be carried out after the saw blade idles stably. It is not allowed to start the saw blade when the blade is in contact with the stone. During cutting, it is not allowed to stop the rotation of the saw blade. It is required to exit the saw blade before stopping the cutting.
3.In case of rock shaking during cutting, stop cutting immediately, and continue to work after the rock is firmly fixed. During cutting, do not move the rock arbitrarily.
4. Idling: especially when the new matrix is used for the first time, it needs to idle for about 30 minutes, and it needs to idle with water in the high temperature season in summer. Its purpose is to further eliminate the influence on the matrix when welding the cutter head, and enhance the memory of the internal quality of the saw blade under the high-speed rotation state.
5. Adjust the travel switch according to the length, width and height of the stone to make the saw blade lifting and the travel of the charging car within the reliable and effective range. Before sawing, the cutting edge of the saw blade shall be 10-20mm away from the stone. After sawing, there should be 20-40mm left between the saw blade and the bottom of the stone. Before the saw blade moves left and right, the diamond saw blade should be pulled out of the stone saw blade completely. The distance should not be less than 150-200mm to prevent the diamond saw blade from hitting the stone.
