Diamond saw blades maintenance and use requirements
Chois Dong
2015-08-11 17:58:42
Diamond saw blade maintenance method:
Diamond saw blades, if not used immediately, it should be flat or hanging it bore, flat diamond saw blade cannot be piled up on other articles or foot, and pay attention to moisture-proof, corrosion-proof.
When no longer sharp, diamond saw blade cutting surface rough, grinding must be carried out promptly. Grinding does not change the original angle, and destruction of dynamic balance.
Diamond blade diameter correction, positioning hole processing must be carried out by the manufacturer. If poor processing and may affect the product performance, and potentially dangerous, reaming cannot exceed the aperture 20mm in principle, so as not to affect the balance of stress.
Diamond saw blades, if not used immediately, it should be flat or hanging it bore, flat diamond saw blade cannot be piled up on other articles or foot, and pay attention to moisture-proof, corrosion-proof.
When no longer sharp, diamond saw blade cutting surface rough, grinding must be carried out promptly. Grinding does not change the original angle, and destruction of dynamic balance.
Diamond blade diameter correction, positioning hole processing must be carried out by the manufacturer. If poor processing and may affect the product performance, and potentially dangerous, reaming cannot exceed the aperture 20mm in principle, so as not to affect the balance of stress.
Diamond saw blade usage requirements:
Work, should ensure that the workpiece is fixed, profile location on the engagement track, so as to avoid the exception, and do not exert side pressure or curve cutting, feed smoothly, avoid impact blade contacts the workpiece, causing the saw blade breakage, or fly out of the workpiece, accident.
Work, found abnormal sound and vibration, rough cut, or when the odor, you must immediately terminate the operation, checks in a timely manner, so as to avoid accidents when troubleshooting.
When you start cutting and end cutting, do not feed too quickly, avoid causing broken teeth and broken.
When cutting aluminum or other metals, to use a special coolant to prevent overheating of saw blades, tooth paste, and other damage, affecting the cutting quality.
Slag equipment flutes and equipment ensure smooth to prevent slag deposition into blocks, the impact of production and safety.
Dry-cutting, please don't be long time continuous cutting, so as not to affect the life of the saw blade and cutting effect wet cutting, water cutting, to guard against leakage.
Work, should ensure that the workpiece is fixed, profile location on the engagement track, so as to avoid the exception, and do not exert side pressure or curve cutting, feed smoothly, avoid impact blade contacts the workpiece, causing the saw blade breakage, or fly out of the workpiece, accident.
Work, found abnormal sound and vibration, rough cut, or when the odor, you must immediately terminate the operation, checks in a timely manner, so as to avoid accidents when troubleshooting.
When you start cutting and end cutting, do not feed too quickly, avoid causing broken teeth and broken.
When cutting aluminum or other metals, to use a special coolant to prevent overheating of saw blades, tooth paste, and other damage, affecting the cutting quality.
Slag equipment flutes and equipment ensure smooth to prevent slag deposition into blocks, the impact of production and safety.
Dry-cutting, please don't be long time continuous cutting, so as not to affect the life of the saw blade and cutting effect wet cutting, water cutting, to guard against leakage.
