- What's the difference between resin polishing pad and metal floor grinding block? 2021-01-18
- What is the welding process of the gang saw? 2020-10-29
- Why is the uneven wear of the diamond saw blade? 2020-10-29
- How to choose the diamond segment for cutting different stones? 2020-10-28
- What to do if the cutting effect is not good? 2020-10-27
- Application and Characteristics of BOREWAY Diamond Grinding Block 2020-10-27
- How to process ultra-thin stone? 2020-10-26
- The working principle of diamond tools and the four factors for correct use 2020-10-21
- Do you know how diamond bits are made? 2020-10-21
- How to use the diamond wire saw tool produced by boreway? 2020-10-15
- Why can diamond be used for glass drilling? 2020-11-25
- 2020 What is a brazed diamond saw blade? What are the advantages? 2020-11-23
- Why is the saw blade sandblasted and painted? What is it for? 2020-11-06
- 2020 diamond grinding tool -- what is litchi bush hammer? 2020-11-12
- What are the advantages of brazing diamond tools, and why are they recognized by users? 2020-10-10
- Introduction and classification of BOREWAY diamond saw blades 2020-10-09
- Why is the problem that the saw blade cannot be cut, the teeth are lost, the working noise is loud？ 2020-11-03
- Can a marble saw blade cut granite? 2020-09-30
- How is granite mined from the mine? 2020-09-25
- What kind of stone should be used for decoration between the threshold stones? 2020-09-22
- Subscribe
-
Get email updates on new products
- Hot Products
- Contact Us
- Contact us: Fujian Nanan Boreway Machinery Co.,Ltd.,ADD: HuaHui Center, Shuitou Town,Quanzhou, Fujian, China, ... Contact Now
- Follow us
- Latest News
-
-
The physical properties of diamond
Diamond is one of the largest mineral hardness. Diamond can be divided into two categories according to the causes of natural and man-made. Natural di... -
Production technology of diamond segment?
The manufacturing process of BOREWAY mechanical diamond segment is divided into 5 steps, which are batching, mixing, cold pressing, hot pressing ... -
Why can not diamond blade machining steel?
Above 800 degrees Celsius, the diamond powder dissolves in iron. Use of diamond cutting tool turning iron material, as a result of friction heat, diam... -
Profile Of Brazed
Brazing is lower than the parent metal melting point of solder metal materials,will be heated to a temperature higher than the melting point solder, w... -
What Is Lavina Quick Change Diamond Concrete Grinding Shoes？
Descriptions: What Is Lavina Quick Change Diamond Concrete Grinding Shoes？ Our Lavina diamond grinding shoes are mainly used for grinding concrete, a... -
What is the thickness of the base of the ultra-thin saw blade?
Ultra-thin diamond saw blade refers to high-precision special-purpose diamond cutting blade.According to different bonding agents, the production is divided into metal bonding agents, resin bonding agents and electroplated diamond cutting blades. -
The definition of the resin
Resin is usually refers to the scope of heated after soften or melt, softenedunder the action of external force has a tendency to flow, when the tempe... -
What saw blades can cut jade?
It is widely used for cutting gems, stone, and hard and brittle materials such as glass, ceramics, and graphite. -
Can 125mm bush hammer plate be used in concrete?
Bush hammer plate can remove old epoxy coating, renovate different kinds of ground surface, and make antique effect. Effective and safe anti slip granite, granite, marble and concrete surfaces. Preparation for grinding and polishing of concrete before laying new layers. -
How To Choose The Right Grit For The Diamond Grinding Cup Wheel?
Describe: How To Choose The Right Grit For The Diamond Grinding Cup Wheel? Diamond Grinding Cup Wheel metal bond diamonds have high strength, e...
-
