Types and advantages of diamond wire saws

Diamond wire saws are divided into wire saws, diamond bead saws, and diamond wire saws.

There are two types of wire saws, single-wire and multi-wire, but multi-wire is commonly used.

The multi-wire wire saw uses a wire wound on a set of wire guide wheels to form a row of cutting lines arranged at a certain interval. During cutting, the steel wire moves in a certain direction, and the workpiece and the steel wire are pressed against each other. When the cutting fluid containing free abrasive is poured between the workpiece and the saw wire, the rapid movement of the saw wire will bring the cutting fluid into the kerf of the workpiece and produce cutting action.

The commonly used free abrasive is silicon carbide; the cutting fluid is usually a mixture of abrasive and mineral oil in a certain proportion.

The main features of the wire saw are: narrow cutting seam, the smallest cutting seam can reach 0.2mm at present, the cutting volume is large, and the cutting cost is low;

Boreway's diamond wire saw with wire saw and hacksaw is made of high-quality diamond and stainless steel. They are designed for high-precision cutting of wood, marble, jade, glass, etc. The saw frame is adjustable, allowing you to use various saws with a length of 3-16 cm. (Diamond Wire Saw Manufacturer China)

Advantage:

1. Long service life.

2. The slit is smaller, the waste is less, and the output is higher.

Feature:

1. Wooden handle, suitable for hand-held.

2. It can be used in dry or humid conditions, but we recommend wet use.

3. Fix the blade firmly into the frame with thumb screws

Application:

Suitable for high-end cutting wood, marble, jade, glass, etc.

Machine: for saw bow, manual/single line/multi-line diamond cutting machine