What diamond tools are needed for floor consumables?
Grinding is a very important process in floor construction (Redi Lock Metal Bond Diamond Grinding Pad)
Very suitable for grinding concrete floor construction, application of all types of concrete and terrazzo floors before polishing, preparation for fine grinding on floors or renovation of old floors.
Diamond grinding disc is the collective name of diamond water grinding disc and dry grinding disc. Diamond water grinding disc, also known as diamond soft grinding disc, is a flexible processing tool made of diamond as abrasive + composite material. Factory sales (7Pcs/set 4inch Stone diamond sanding disc)
1. It is suitable for stone polishing, line chamfering, curved board and special-shaped stone processing. It has strong grinding power, good durability, good softness, clarity and gloss.
2. The back is glued with Velcro cloth, which is glued to the joint of the mill for grinding. It can process stone, ceramic, glass, floor tiles and other materials.
Image by Pexels from Pixabay
Floor construction consumables and auxiliary materials mainly include: quartz sand, quartz powder 1mm, 2mm, 3mm toothed trowels, toothless push knives, scrapers, abrasive belts, roller brushes, rollers, masking paper, sand discs, diamond grinding discs , Smooth Grinding Metal Diamond Pads,etc.
Quartz sand, quartz powder
It is a thermal coating process, that is, the raw sand is preheated to a certain temperature, resin is added to make it melt, and the resin is coated on the surface of the sand grains, and the coated sand is obtained after cooling, crushing and screening.
Trowel is one of the professional construction tools for epoxy floor, divided into toothed knife and non-toothed knife.
The special steel plate used is traditional hand-made, with moderate hardness, good elasticity and sufficient toughness. It is an indispensable tool for the construction of various epoxy resin floors and self-leveling floors. The specifications include flat heads and teeth.
The specifications of the tooth knife are 1mm, 2mm, 3mm, etc., usually 2mm and 3mm are used in the construction of self-leveling intermediate coating and top coating.
The toothless knife is used for batch repair primer and intermediate coating.
