Precautions When Using Diamond Grinding Wheels

In order for everyone to use the diamond grinding wheel to process workpieces, we will introduce you to the precautions when using the diamond grinding wheel.

1. Diamond grinding wheels should be checked frequently to ensure normal operation.

   (China Diamond Convex Grinding Wheel Supplier)

2. The rotation direction of the diamond grinding wheel should be correct, so that the grinding debris will fly downward and not hurt people.

3. After starting the grinding wheel, wait for the grinding wheel to rotate smoothly before starting to grind. If the grinding wheel is found to be bounced obviously, it should be stopped and repaired in time.

4. Precautions when using the diamond grinding wheel, the distance between the shelf of the diamond grinding wheel and the sand service outlet should be kept within 3mm to prevent the grinding piece from rolling in and causing an accident.

5. Do not use cotton yarn to wrap the workpiece or wear gloves for grinding, so as to avoid accidents caused by gloves or cotton yarn being caught in the diamond grinding wheel

     (China Diamond Grinding Cup Wheels Manufacturer)


8. When grinding, it is necessary to prevent the tool or workpiece from violently impacting the grinding wheel or exerting excessive pressure.

9. Precautions for the use of diamond grinding wheels. It is forbidden for two people to operate on the same grinding wheel at the same time, and it is not allowed to grind the workpiece on the side of the grinding wheel.

10. For small, large and difficult-to-handle workpieces, do not grind on diamond grinding wheels. Especially small workpieces should be held firmly to prevent squeezing into the diamond grinding wheel and crushing the diamond grinding wheel.

11. Diamond grinding wheels are not allowed to get wet. The two-wing revolving doors of the automatic revolving door of the revolving door should always be kept dry to prevent loss of balance and accidents after being wet.

(China Diamond Grinding Cup Wheels Factory)


12. Babbitt alloy, copper, tin, aluminum, wood and other materials that can stick to sand particles are not allowed to be ground on the grinding wheel.

13. After using the diamond grinding wheel, turn off the power immediately and do not let the grinder run idly.

14. Diamond grinding wheels that are too small should be replaced in time.