Wet Air Polisher Pneumatic Grinder For polishing Stone Marble Granite And Concrete

This Wet Air Polisher Pneumatic Grinder  Excellent performance with lower vibration and noise, Gravity casting housing carries long duration, Centre water feed function smooth finishing and reduces dust and improves environment protection. Water valve can be adjusted for variable water-flow. Include a reversible side handle for easy operation. Light weight(3lbs) and compactable design are suitable for single-hand operation. Rubber sleeve to hold the polisher well. 4" connection pad with verlcro hook to connect the polishing pads.

Side exhaust air polisher/ Pneumatic wet polisher Compressed air should be dry and cool, as high-moisture air will lead to internal rusting that could cause machine failure. The air pressure should normally be maintained at  90PSI~116PSI(0.62MPa~0.8MPa). Always supply adequate water during operation.

Advantage:

1. Rear exhaust.

2. Side mounted water control knob and air inlet with regulating knob.

3. This low speed tool does the sandin and polishing work by fitting sanding disc wet 3"-4" in different grit from coarse to fine. Great for laminating marble or stone table and trim work.

4. The water-fed installation favors your marble and stone finish work by water flow on the  working area and does no harm to your body due to non-dust atmosphere at operation.

Wet Air Polisher Pneumatic Grinder

Side Exhaust Air Polisher/ Pneumatic Wet Polisher

Wet Air Polisher Pneumatic Grinder For polishing Stone Marble Granite And Concrete

 Pneumatic Angle Grinder

Side exhaust air polisher/ Pneumatic wet polisher